Various devices have their own unpleasant moments when the device overheats and various mechanical damage. But the most common cause of a broken notebook is when water or other drinks get under its keyboard, and then we are already talking about repairing the device. Now we'll give you useful tips to help you with this unpleasant situation. If the keyboard is flooded, it is not good, because it is underneath the components, processors, motherboards and other components. If there is a short circuit and then there is corrosion, then your device will have to be repaired, which sometimes costs almost as much as the purchased device. Now we will tell you what to do first, remember, if you do everything quickly and correctly, it will reduce the cost of repairing your laptop, at best it can even be avoided.
What you should do if you flood your laptop.
When such an unpleasant situation happens, be sure to unplug the mains cable from the power connector. This should be done quickly, plus press the power button for a few seconds to turn off the device. At this point, not closed programs and lost files, which can be recovered not so important, the main thing is to save the laptop. Next, be sure to turn the device over and remove the battery, that is, completely power off the device. The liquid gradually penetrates downwards, some keyboards have metal substrates that can stop the moisture. Put your device so that the keyboard is pointing down, put a towel or something dry. Remember to dry your gadget for at least two or three days. To avoid unwanted mistakes, do not turn the device on hastily until it dries. Never use a hair dryer or a battery, because unwanted condensation may appear or some components may just overheat and the gadget will become unusable.
What to do after drying your laptop.
It is best to contact a special service center, do not try to turn it on yourself, if there is any corrosion, the motherboard will burn. Give the device to masters, let them diagnose, it costs money, but if you did everything correctly during drying, it will be the minimum expense. Many users have old laptops, so they do not want to give them to the masters, you can of course try to deal with this problem yourself, and for this we also have some tips. But this is all done on your own conscience, the result may not lead to anything. Liquids can be called by the effect on the aggressive and not aggressive. The first category includes drinks containing sugar, salt and other substances that have a very negative impact on computer components. When ordinary water gets in, the chances of saving your device are much higher, we will advise you what to do next.
Self-cleaning and diagnostics of your laptop.
Once the notebook got into the moisture, of course you need to disassemble it and see where it got. Some masters say that after normal water, dry well enough and then the laptop can be turned on. When you open the inside of the device, be sure to see where the moisture is, if only under the keyboard, it is very good, then dry and then turn on carefully. Also, when you fill in the keys, it can be opened and flushed by hand, then dried and turned on, the method is very effective. If you find moisture on your motherboard, you should gently clean the place with cotton wool or an old alcohol toothbrush. Once it's completely dry, feel free to turn it on.
Still, we want to say that these methods are really effective, but nothing can replace repair in a service center where professionals know their business. And then it's up to you. Be careful and do not fill your laptop with any liquids, be careful with above all.